2004 Cadillac CTS-V Owner's Manual - Page 202

Entering the Personalization Menu To enter the feature programming mode, use one of the following procedures: Navigation System 1. Turn the ignition to ON without the engine running. Make sure an automatic transmission is in PARK (P) or a manual transmission has the parking brake set. 2. If your vehicle has memory settings, press the appropriate memory button, 1 or 2, located on the driver's door armrest. The DIC display will show either Driver 1 or 2 depending on which button was selected. 3. Turn on the Navigation/audio system by pressing the PWR/VOL knob located to the lower left of the display once. 4. Access the DIC main menu by pressing the MAIN button located to the lower left of the display. 5. Press the multi-function button next to Feat Prog to access the Feature Programming menu. 6. Press the TUNE/SEL knob to turn on the Personalization features. An X will appear in the box to the left when Personalization is turned on. Base Audio System 1. Turn the ignition to ON, but do not start the engine. Make sure an automatic transmission is in PARK (P) or a manual transmission has the parking brake set. 2. If your vehicle has memory settings, press the appropriate memory button, 1 or 2, located on the driver's door armrest. The DIC display will show either Driver 1 or 2 depending on which button was selected. 3. Press the TUNE/SEL knob once to access the main menu of the DIC. 4. Turn the TUNE/SEL knob until SETUP is highlighted. 5. Press the TUNE/SEL knob once to access the SETUP menu. 6. Scroll to the feature you want to change, and press the TUNE/SEL knob to turn the feature on or off. If the feature is turned on, a check mark will appear next to the feature name. If none of the personalization items are turned on, turn on the personalization menu by pressing the TUNE/SEL knob. The list of features will then appear, and you can repeat Step 6. 3-80