2004 Cadillac CTS-V Owner's Manual - Page 203

Personalization Features The following choices are available for programming using both the Base audio and Navigation systems unless otherwise indicated. Personalization Name This feature allows you to type in a name that will appear on the DIC display whenever the corresponding remote keyless entry transmitter is used or one of the buttons on the driver's door armrest (1 or 2) is pressed. If a customized name is not programmed, the system will show Driver 1 or Driver 2 to correspond with the numbers on the back of the remote keyless entry transmitters. To program a name, use one of the following procedures: To customize the name using the Base audio system, do the following: 1. Enter the Personalization menu following the instructions listed previously. 2. Select the PERSONALIZATION NAME menu item by pressing the TUNE/SEL knob once. You will see a cursor on the screen. 3. Turn the TUNE/SEL knob until you reach the first letter you want; the letter will be highlighted. There is a complete alphabet with both upper and lower case letters and the numbers zero through nine. Also included are spaces and other non-letter characters such as the ampersand (&). 4. Press the TUNE/SEL knob once to select the letter. The letter will then appear on the display. If you make a mistake, press the Back key. This will exit the menu. You can then go back into the menu and edit the name. You can also press the TUNE/SEL knob repeatedly to cycle through all the characters until you reach the character you wish to change. 5. Repeat Steps 2 and 3 until the name you want is complete. You can program up to 16 characters. 6. Press the BACK button located to the lower right of the display to exit and set your choice or let the screen time out and return to the main screen. 3-81