2004 Cadillac Escalade EXT Owner's Manual - Page 234

CD Changer To load a CD, perform the following steps: 1. Press the LOAD button. Available positions will blink amber. 2. Select a position by pressing the desired numbered button with the amber blinking light. If a button is not pressed within five seconds, the changer will go to the lowest available position. 3. Load the CD when the loading slot indicators turn amber. An internal door will open allowing a single CD to be inserted into the changer. After approximately 10 seconds the changer will be ready to play. The CD changer plays up to six standard size CDs continuously. Individual CDs may be loaded or ejected into or from any position. A green light on each numbered button indicates a CD is loaded in the respective position. An amber light on a numbered button indicates that a CD is playing. When loading CDs, the loading slot indicators turn amber to indicate that the player is ready to accept a CD. CDs can be loaded or ejected with the radio or the ignition being on or off. You must load CDs with the label side up. If you do not, the player will automatically eject the CDs. Notice: Loading CDs with adhesive labels will damage the player. To load two or more CDs, perform the following steps: 1. Press and hold the LOAD button. The first CD will be loaded into the lowest numbered empty position. 2. Load a single CD when the loading slot indicators turn amber. After about 10 seconds the changer will cycle to the next available position. 3. Repeat Step 2 until all CDs are loaded into all of the desired positions. If you do not wish to load all of the positions, you can cancel the load all function by pressing a button with a green flashing indicator light or wait 20 seconds for the changer to time out. 3-92