2006 Cadillac SRX Owner's Manual - Page 383

7. Raise the tire fully against the underside of the vehicle. Continue turning the wheel wrench until you feel more than two clicks. This indicates that the compact spare tire is secure and the cable is tight. The spare tire hoist cannot be overtightened. 3. Tilt the retainer downward and slip it through the center hole of the spare tire. Makesure the retainer is fully seated across the underside of the wheel. 4. Attach the wheel wrench to the hoist shaft. 5. Turn the wheel wrench clockwise to lift the spare tire. 6. When the tire is almost in the stored position, turn the tire so that the valve stem is towards the rear of the vehicle. This will help when you check and maintain tire pressure in the spare. 8. Make sure the tire is stored securely. Push, pull (A), and then try to turn the tire (B). If the tire moves, use the wheel wrench to tighten the cable. Put back all tools as they were stored in the rear storage compartment and put the compartment cover back on. 5-85