2006 Cadillac STS-V Owner's Manual - Page 143

Entering the Driver Exit Settings Submenu To enter the memory programming mode for your exit settings, use the following procedure: 1. Be sure the ignition is either on, in ACC position, or in RAP and place the transmission in PARK (P) or the vehicle speed is less than 6 mph (9 km/h). 2. Press any button on the appropriate keyless access transmitter to identify yourself as Driver 1 or Driver 2. 3. Turn on the radio by pressing the power/volume knob. 4. Press the CNFG radio button to enter the main menu of the radio. 5. Turn the tune/select knob and scroll to SETUP. 6. Press the tune/select knob to enter the SETUP menu. 7. Turn the tune/select knob and scroll to DRIVER EXIT SETTINGS. 8. Press the tune/select knob to enter the DRIVER EXIT SETTINGS submenu. The following items will appear: Driver Exit Settings Submenu Items RECALL EXIT SETTINGS To recall exit settings, use the following procedure: 1. Enter the memory programming mode for your exit settings by following the instructions listed previously under "Entering the Driver Exit Settings Submenu." 2. From the DRIVER EXIT SETTINGS submenu, turn the tune/select knob to scroll to RECALL EXIT SETTINGS and press in the knob. If the vehicle is in PARK (P), one beep will sound and your previously saved exit position will then be recalled. If the vehicle is not in PARK (P), three beeps will sound and your previously saved exit position will not be recalled. A memory recall can be stopped by pressing any memory seat or mirror position button. If you would like the stored exit positions to be recalled when your vehicle is in PARK (P), the vehicle is off, and the driver's door is opened, see "AUTO EXIT SEAT" and "AUTO EXIT COLUMN" under Vehicle Personalization on page 2-53. • RECALL EXIT SETTINGS • STORE EXIT SETTINGS 2-73