2006 Cadillac STS-V Owner's Manual - Page 243

5. Press the tune/select knob to select. AUTOSTORE will appear on the display. The radio will automatically search the band and select and store the six radio stations with the strongest signal. The stations will be stored by signal strength, not sequential order. The set preset station number will appear on the display above the pushbutton that it is set to. Whenever that numbered pushbutton is pressed for less than two seconds, the station that was set will return. 6. Press the BACK (F6) button to exit the display. To return to the original display, repeatedly press the BACK (F6) button or wait for the display to time out. When battery power is removed and later applied, you will not have to reset your radio presets. PRESETS HOME/AWAY: This feature gives you the ability to store two different kinds of station presets. HOME can be used for stations available where you live and AWAY can be for stations available outside of your local broadcasting area. To set preset stations for home and away perform the following steps: 1. Press the tune/select knob to enter the main menu. 2. Turn the tune/select knob until PRESETS HOME/AWAY appears on the display. 3. Press the tune/select knob to select. HOME or AWAY will appear on the display. 4. Press the BACK (F6) button to exit the display. To return to the original display, repeatedly press the BACK (F6) button or wait for the display to time out. Follow the manual or automatic steps previously listed for setting the preset pushbuttons for both home and away. Setting the Tone (Bass/Treble) To adjust the bass, midrange, and treble, perform the following steps: 1. Press the tune/select knob to enter the main menu. 2. Press the tune/select knob to scroll through the settings. 3. Turn the tune/select knob to increase or to decrease the bass, midrange, or treble. If a station is weak or noisy, decrease the treble. 4. Press the tune/select knob to set the adjustment. 5. Press the BACK (F6) button to exit the display. To return to the original display repeatedly press the BACK (F6) button or wait for the display to time out. 3-99