2006 Cadillac STS-V Owner's Manual - Page 78

The Canadian immobilizer standard requires Canadian owners to see their GM dealer for matching new transmitters when a recognized transmitter is not available. United States Owners are permitted to match a new transmitter to their vehicle when a recognized transmitter is not available. The procedure will require three, ten minute cycles to complete the matching process. Do the following: 1. The vehicle must be off. 3. Insert the vehicle key into the key lock cylinder located on the driver's door. 4. Turn the key to the unlock position five times within five seconds. 5. The DIC message will display OFF/ACC TO LEARN. 6. Press the OFF/ACC button (ignition switch). 7. The DIC will read WAIT 10 MINUTES and will count down to zero, one minute at a time. 8. The DIC will display OFF/ACC TO LEARN again. 9. Press the OFF/ACC button (ignition switch) again. 10. The DIC will again read WAIT 10 MINUTES and will count down to zero, one minute at a time. 11. The DIC will display OFF/ACC TO LEARN again. 12. Press the OFF/ACC button (ignition switch) again. 13. The DIC will again read WAIT 10 MINUTES and will count down to zero, one minute at a time. 14. A beep will sound and the DIC will read READY FOR FOB #1. At this time, all previously known transmitters have been erased. 2. Place the new, unrecognized transmitter into the transmitter pocket with the transmitter buttons facing the front of the vehicle. The transmitter pocket is inside the center console storage area located between the driver and front passenger seats. 2-8 15. Once the transmitter is recognized and programmed, a beep will sound and the DIC will display READY FOR FOB #2. 16. Remove the keyless access transmitter and press the unlock button twice to initialize it.