2007 Cadillac STS Owner's Manual - Page 171

Driver Selection Submenu Items DRIVER 1/DRIVER 2 The numbers on the back of each keyless access transmitter correspond to DRIVER 1 and DRIVER 2. If you would like to recall or store driver settings for the driver that does not correspond to the number on the back of the keyless access transmitter that you are using, use the following procedure: 1. Enter the memory programming mode for your driver settings by following the instructions listed previously under "Entering the Driver Selection Submenu." 2. From the DRIVER SELECTION submenu, turn the tune/select knob to highlight the driver number that you want, either DRIVER 1 or DRIVER 2. 3. Set your choice by pressing in the tune/select knob. If you would like to recall or store driver settings for the selected driver, see "RECALL DRIVER SETTINGS" or "STORE DRIVER SETTINGS" later in this section. If you would like to recall or store exit settings for the selected driver, see "RECALL EXIT SETTINGS" or "STORE EXIT SETTINGS" later in this section. RECALL DRIVER SETTINGS To recall driver settings, use the following procedure: 1. Enter the memory programming mode for your driver settings by following the instructions listed previously under "Entering the Driver Selection Submenu." 2. From the DRIVER SELECTION submenu, turn the tune/select knob to scroll to RECALL DRIVER SETTINGS and press in the knob. If the vehicle is in PARK (P), one beep will sound and your previously saved driving position will then be recalled. If the vehicle is not in PARK (P), three beeps will sound and your previously saved driving position will not be recalled. A memory recall can be stopped by pressing any memory seat or mirror position button. If you would like the stored driving positions to be recalled when unlocking your vehicle with the keyless access transmitter or when starting your vehicle, see "REMOTE RECALL MEMORY" or "START BUTTON RECALL" under Vehicle Personalization on page 148. 171