2007 Cadillac STS Owner's Manual - Page 93

4. Turn the key to the unlock position five times within five seconds. 5. The DIC message will display OFF/ACC TO LEARN. 6. Press the Acc. button (ignition switch). 7. The DIC will read WAIT 10 MINUTES and will count down to zero, one minute at a time. 8. The DIC will display OFF/ACC TO LEARN again. 9. Press the Acc. button (ignition switch) again. 10. The DIC will again read WAIT 10 MINUTES and will count down to zero, one minute at a time. 11. The DIC will display OFF/ACC TO LEARN again. 12. Press the Acc. button (ignition switch) again. 13. The DIC will again read WAIT 10 MINUTES and will count down to zero, one minute at a time. 14. A beep will sound and the DIC will read READY FOR FOB 1. At this time, all previously known transmitters have been erased. 15. Once the transmitter is recognized and programmed, a beep will sound and the DIC will display READY FOR FOB 2. 16. Remove the keyless access transmitter and press the unlock button twice to initialize it. If you have additional transmitters to program, this process can be repeated until four transmitters have been programmed. The DIC will then display MAX # FOBS LEARNED and will exit the programming mode. When you are done programming transmitters, press the unlock button on each keyless access transmitter twice. After performing this process, transmitters previously programmed will no longer work with your vehicle and must be reprogrammed. 93