2008 Cadillac Escalade ESV Owner's Manual - Page 253

Using the AUX Display (If Equipped) If your vehicle has Rear Seat Entertainment (RSE), an AUX screen appears as the SRCE (source) key is pressed. When AUX is selected in the front, the audio from the device plugged into the auxiliary jacks in the rear can be played over the vehicle speakers. Select between AUX and DVD video on the video screen while listening to AUX audio. See Rear Seat Entertainment (RSE) System on page 3-95 for more information on the auxiliary jacks. SRCE (Source): Press to select the AUX display. F2 (DVD): Press to select DVD video on the video screen in the rear, with AUX audio on the vehicle speakers. F5 (AUX): Press to select AUX video on the video screen in the rear, with AUX audio on the vehicle speakers. 3. Press this knob to enter into SETUP. 4. Turn this knob until CONFIGURE DISPLAY KEYS displays. 5. Press this knob again to enter into CONFIGURE DISPLAY KEYS. 6. Turn this knob to select which of the four configurable keys are to be changed. The currently assigned feature shows on the display. 7. Press this knob to select the configurable key to change. 8. Turn this knob to find the feature that you would like to store to the key. 9. Press this knob again when the feature to be stored, is found. The display updates and shows the symbol of the selected feature next to the configurable key. 10. Repeat the previous steps for each configurable key. Once a feature is programmed to a key, the feature does not display when programming the remaining configurable keys. The configurable keys can be changed at any time. Configurable Radio Display Keys This feature lets you customize the four keys that are located on each side of the radio display to make it easier to adjust the radio features. To program the configurable radio display keys, perform the following steps: 1. Press the knob to enter the main menu. 2. Turn the w knob until SETUP displays. 3-89