2009 Cadillac XLR-V Owner's Manual - Page 110

Using Universal Home Remote Press and hold the appropriate button for at least half of a second. The indicator light comes on while the signal is being transmitted. Operation can occur: Reprogramming Universal Home Remote Buttons Any of the three buttons can be reprogrammed by repeating the instructions. • If the vehicle is in accessory mode. • If the vehicle is in running. • If the vehicle is in Retained Accessory Mode (RAP). See Retained Accessory Power (RAP) on page 2-25 for more information. Erasing Universal Home Remote Buttons The programmed buttons should be erased when the vehicle is sold or the lease ends. To erase either Rolling Code or Fixed Code on the Universal Home Remote device: 1. Press and hold the two outside buttons at the same time for approximately 20 seconds, until the indicator lights, located directly above the buttons, begin to blink rapidly. 2. Once the indicator lights begin to blink, release both buttons. The codes from all buttons are erased. For help or information on the Universal Home Remote System, call the customer assistance phone number under Customer Assistance Offices on page 8-6. • Up to an additional 10 minutes after RAP finishes. • Up to 10 minutes after any door is opened. 2-52