2009 Cadillac XLR-V Owner's Manual - Page 134

Setting Cruise Control Resuming a Set Speed If the cruise control is set at a desired speed and the brake is applied, the cruise control will turn off. It does not need to be reset Once the vehicle is going about 25 mph (40 km/h) or more, move the cruise control switch briefly from R to S . The vehicle will go back up to the chosen speed and stay there. If the switch is held at resume/accelerate the vehicle will keep going faster until the switch is released or the brake is applied. Do not hold the switch at resume/accelerate, unless you want the vehicle to go faster. { CAUTION: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. 1. Move the cruise control switch to on. 2. Get up to the speed desired. 3. Press the set button at the end of the lever and release it. 4. Take your foot off the accelerator pedal. This light J appears on the instrument panel cluster when the cruise control is engaged. 3-12