2009 Cadillac XLR-V Owner's Manual - Page 65

Programming with a Recognized Transmitter A new transmitter can be programmed to the vehicle when there is one recognized transmitter. For vehicles sold in Canada, two recognized transmitters are required to program a new transmitter. 1. The vehicle must be off. 2. Both the recognized and new transmitters must be with you. 3. Insert the vehicle key into the key cylinder located on the lower rear fascia on the driver side of the vehicle. See Trunk on page 2-14 for more information on the key cylinder. 4. Open the trunk. 5. Turn the key five times within five seconds. 6. The Driver Information Center (DIC) displays READY FOR FOB # 2, 3 or 4. 7. Place the new transmitter in the glove box transmitter pocket with the buttons facing the passenger side. 2-7