2009 Cadillac XLR-V Owner's Manual - Page 66

8. A beep sounds once programming in complete. The DIC will display READY FOR #3 or 4, or MAX # FOBS LEARNED. 9. To program additional transmitters, repeat Step 7. Press Acc. on the ignition switch if programming is complete. 10. Press K on each newly programmed transmitter to complete the process. Programming without a Recognized Transmitter This procedure requires three ten minutes cycles to complete the programming process. United States owners are permitted to program a new transmitter to their vehicle when a recognized transmitter is not available. The Canadian immobilizer standard requires that Canadian owners see their dealer/retailer for programming new transmitters when two recognized transmitters are not available. 1. The vehicle must be off. 2. Place the new transmitter in the glove box transmitter pocket with the buttons facing the passenger side. 3. Insert the vehicle key into the key cylinder located on the lower rear fascia on the driver side of the vehicle. See Trunk on page 2-14 for more information on the key cylinder. 4. Open the trunk. 5. Turn the key five times within five seconds. 6. The DIC message displays OFF-ACC TO LEARN. 2-8