2010 Cadillac Escalade Owner's Manual - Page 267

3. Say the name tag of the person to call. . Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle... If the system clearly recognizes the name tag it responds with "OK, calling, " and dials the number. If the system is unsure it recognizes the right name tag, it confirms the name tag followed by a tone. If the name tag is correct, say "Yes". The system responds with "OK, calling, " and dials the number. If the name tag is not correct, say "No". The system will ask for the name tag to be re‐entered. . b g and begin speaking to answer the call. Press c x to ignore a call. Press Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. . Once connected, the person called will be heard through the audio speakers. Using the Re‐dial Command 1. Press and hold b g for two seconds. The system responds with "Ready" followed by a tone. 2. After the tone, say "Re‐dial". The system responds with "Re‐dial using " and dials the last number called from the connected Bluetooth phone. Once connected, the person called will be heard through the audio speakers. Press b g to answer an incoming call when another call is active. The original call is placed on hold. Press . . b g again to return to the original call. To ignore the incoming call, continue with the original call with no action. Press c x to disconnect the current call and switch to the call on hold. . 4-75