2010 Cadillac STS Owner's Manual - Page 109

7. The DIC reads WAIT 10 MINUTES and counts down to zero. 8. The DIC displays OFF/ACC TO LEARN again. 9. Press Acc. on the ignition switch. 10. Steps 7, 8 and 9 will be repeated two more times. 11. A beep sounds and the DIC reads READY FOR FOB 1. All previously known transmitter programming has been erased. 12. A beep sounds once programming in complete. The DIC displays READY FOR FOB #2. 13. To program additional transmitters, take transmitter 1 out of the transmitter pocket and place transmitter 2 in the pocket. Up to four transmitters can be programmed. The DIC will then display MAX # FOBS LEARNED and will exit the programming mode. 14. Remove the transmitter from the transmitter pocket and press K twice on each newly programmed transmitter to complete the process. Starting the Vehicle with a Low Transmitter Battery If the transmitter battery is weak, the DIC may display NO FOBS DETECTED when trying to start the vehicle. To start the vehicle, place the transmitter in the center console storage area transmitter pocket with the buttons facing to the front of the vehicle. Then, with the vehicle in P (Park) OR N (Neutral), press the brake pedal and / . Replace the transmitter battery as soon as possible. Change the transmitter battery if the DIC displays KEY FOB BATTERY LOW. 3-9