2010 Cadillac STS Owner's Manual - Page 208

AUTO (Automatic) : Turns the exterior lamps on and off automatically depending upon how much light is outside of the vehicle. The automatic lights may be disabled even if the control is in the AUTO position. To enable automatic lighting do any of the following: . ; (Parking Lamps) : Turns on the parking lamps together with the following: ... Sidemarker Lamps Taillamps License Plate Lamps Instrument Panel Lights Turn the headlamp control from AUTO to off and release the switch. It returns back to the AUTO position by itself. Turn the headlamp control from the parking lamp position to AUTO. Turn the headlamp control from the headlamp position to AUTO. Turn the headlamp control from AUTO to off and release the switch. It returns back to the AUTO position by itself. Turn the headlamp control from AUTO to the parking lamp position. Turn the headlamp control from AUTO to the headlamp position. 5 (Headlamps) : Turns on the headlamps, together with the previously listed lamps and lights. . . IntelliBeam™ Intelligent High-Beam Headlamp Control System For vehicles with IntelliBeam, read this entire section before using this feature. IntelliBeam is an enhancement to the vehicle's headlamp system. It uses a light sensor located on the back of the rearview mirror to turn the high-beam headlamps on and off depending on approaching traffic. The IntelliBeam system turns the high-beam headlamps on when it is dark enough, there is no other traffic present, and the IntelliBeam system is enabled. To disable automatic lighting do any of the following: . . . Disabling automatic lighting disables the automatic headlamp operation, DRL, and IntelliBeam™ High-Beams (if the vehicle has them). Turning On and Enabling IntelliBeam AUTO 3 (IntelliBeam On/Off): Press and release the IntelliBeam button on the inside rear view mirror. The indicator on the mirror turns on. Once the system 4-28