2010 Cadillac STS Owner's Manual - Page 278

Setting Preset Stations Up to 30 stations (six FM1, six FM2, six AM, six XM1 and six XM2), can be programmed on the six numbered pushbuttons. To program preset stations: 1. Tune to a station and select the equalization, DSP, or PTY (program type) setting if desired. 2. Press and hold one of the six numbered pushbuttons for two seconds until a beep sounds. The set preset station number displays above the set pushbutton. If the numbered pushbutton is pressed for less then two seconds, the radio tunes to the station set to that pushbutton. 3. Repeat the steps for each pushbutton. AUTOSTORE PRESETS : When Autostore is used, the radio automatically searches the selected band and stores the six radio stations with the strongest signal. The stations are stored by signal strength, not sequential order. This feature does not function with XM radio stations. To program autostore presets: 1. Press 2. 3. Press w to select AUTOSTORE PRESETS. The radio begins searching and AUTOSTORE displays. 4. Press F6 to exit the display. To return to the original display, repeatedly press F6 or wait for the display to time out. The radio presets do not have to be reset when the vehicle is started, or when the battery power is removed. PRESETS HOME/AWAY : This feature stores two different kinds of station presets. HOME can be used for local stations and AWAY for stations outside of the local broadcasting area. This feature does not function with the XM radio stations. To set preset stations for home and away: 1. Press 2. 3. w to enter the main menu. Turn w until PRESETS HOME/AWAY displays. Press w to select HOME or AWAY. 4. Press F6 to exit the display. To return to the original display, repeatedly press F6 or wait for the display to time out. 5. Follow the steps for programming presets or autostore presets. w to enter the main menu. Turn w until AUTOSTORE PRESETS displays. 4-98