2010 Cadillac STS Owner's Manual - Page 300

Using the Re‐dial Command 1. Press and hold b g for two seconds. The system responds with "Ready" followed by a tone. 2. After the tone, say "Re‐dial". The system responds with "Re‐dial using " and dials the last number called from the connected Bluetooth phone. Once connected, the person called will be heard through the audio speakers. Three‐Way Calling Three‐Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 1. While on a call press b g . The system responds with "Ready" followed by a tone. 2. Say "Three‐way call". The system responds with "Three‐way call, please say dial or call". 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press the callers together. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. Press b g and begin speaking to answer the call. b g to link all Ending a Call To end a call: 1. Press b g . The system responds with "Ready" followed by a tone. 2. Say "End Call". The call is then ended. Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. . Press b g to answer an incoming call when another call is active. The original call is placed on hold. Press Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. . . b g again to return to the original call. To ignore the incoming call, continue with the original call with no action. 4-120