2014 Cadillac CTS Owner Manual - Page 162

5-40 Instruments and Controls PARKING ASSIST OFF After the vehicle has been started, this message displays to remind the driver that the URPA system has been turned off. This message also displays when there is a temporary condition causing the system to be disabled. See Ultrasonic Parking Assist on page 9-43. Press the set/ reset button to acknowledge this message and clear it from the DIC display. after continued driving, the system needs service. Take the vehicle to your dealer. AUTOMATIC LIGHT CONTROL ON This message displays when the automatic headlamps are turned on. TURN SIGNAL ON This message displays as a reminder to turn off the turn signal if you drive the vehicle for more than about 1.6 km (1 mi) with a turn signal on. A multiple chime sounds when this message displays. SIDE BLIND ZONE ALERT SYSTEM OFF This message indicates that the driver has turned the system off. SIDE BLIND ZONE ALERT SYSTEM TEMPORARILY UNAVAILABLE This message indicates that the SBZA system is disabled because the sensor is blocked and cannot detect vehicles in the blind zone. The sensor may be blocked by mud, dirt, snow, ice, or slush. This message may also activate during heavy rain or due to road spray. The vehicle does not need service. For cleaning, see Exterior Care on page 10-112. Object Detection System Messages PARKING ASSIST BLOCKED SEE OWNER'S MANUAL If the vehicle has the Ultrasonic Rear Park Assist (URPA) system, this message displays if there is something interfering with the park assist system. See Ultrasonic Parking Assist on page 9-43 for more information. SERVICE PARKING ASSIST This message displays if there is a problem with the Ultrasonic Rear Parking Assist (URPA) system. Do not use this system to help you park. See Ultrasonic Parking Assist on page 9-43 for more information. See your dealer for service. SERVICE SIDE BLIND ZONE ALERT SYSTEM If this message appears, both SBZA displays will remain on indicating there is a problem with the SBZA system. If these displays remain on