2014 Cadillac CTS Owner Manual - Page 37

Keys, Doors, and Windows 9. Remove the transmitter from the transmitter pocket and press K on the RKE transmitter two times. 10. To program additional transmitters, repeat Steps 6-9. Programming without a Recognized Transmitter United States owners are permitted to program a new transmitter to their vehicle when a recognized transmitter is not available. The Canadian immobilizer standard requires that Canadian owners see their dealer for programming new transmitters when two recognized transmitters are not available. The procedure requires three 10-minute cycles to complete the matching process. 1. Make sure the vehicle is off. 2-7 6. Place the new transmitter into the transmitter pocket with the buttons facing the front of the vehicle. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. 7. A beep sounds once the transmitter is programmed. The DIC displays READY TO LEARN ELECTRONIC KEY #3 or 4, or MAXIMUM # ELECTRONIC KEYS LEARNED. 8. Press the ignition control knob to exit programming mode. 2. Place the new transmitter into the transmitter pocket with the buttons facing the front of the vehicle. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. 3. Insert the vehicle key into the key lock cylinder on the driver door. 4. Turn the key to the unlock position five times within five seconds.