2014 Cadillac CTS Owner Manual - Page 50

2-22 Keys, Doors, and Windows Programming the Power Windows If the vehicle battery has been recharged or disconnected, or is not working, the front power windows will need to be reprogrammed for the express-up feature to work. Before reprogramming, replace or recharge the vehicle's battery. To program: 1. With the ignition in ON/RUN or ACC/ACCESSORY, or when RAP is active, close all doors. 2. Press and hold the power window switch until the window is fully open. 3. Pull the power window switch up until the window is fully closed. 4. Continue holding the switch up for approximately two seconds after the window is completely closed. The window is now reprogrammed. Repeat the process for the other windows. Express Window Anti-Pinch Override Window Operation from Outside the Vehicle The vehicle may be equipped with a remote venting window feature. As you approach the vehicle, press K on the Remote Keyless Entry (RKE) transmitter long enough for the windows to start lowering to the full open position. Pressing the K again will cause window movement to stop. This feature may be turned off by your dealer. { Warning If express override is activated, the window will not reverse automatically. You or others could be injured and the window could be damaged. Before you use express override, make sure that all people and obstructions are clear of the window path. The anti-pinch feature can be overridden. Hold the window switch all the way up to the second position. The window will rise for as long as the switch is held. Once the switch is released, the express mode is reactivated. In this mode, the window can close on an object in its path. Use care when using the override mode.