2014 Cadillac Escalade ESV Owner Manual - Page 426

10-72 Vehicle Care Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before proceeding. See If a Tire Goes Flat on page 10-60 for more information. 2. To remove the center cap, place the chiseled end of the wheel wrench in the slot on the wheel and gently pry the cap out. 3. Use the wheel wrench to loosen all the wheel nuts. Turn the wheel wrench counterclockwise to loosen the wheel nuts. Do not remove the wheel nuts yet. 8. Tilt the tire toward the vehicle with some slack in the cable to access the tire/wheel retainer. Separate the retainer from the guide pin by sliding the retainer up the pin while pressing down on the latch. Jacking Locations (Overall View) A. Front Position Once the retainer is separated from the pin, tilt the retainer and pull it through the center of the wheel along with the cable and latch. 9. Put the spare tire near the flat tire. B. Rear Position { Warning Getting under a vehicle when it is lifted on a jack is dangerous. If the vehicle slips off the jack, you could be badly injured or (Continued)