2014 Cadillac SRX Owner Manual - Page 100

3-46 Seats and Restraints If you are using a dual tether in the rear center seating position, lower the adjustable headrest down to its stowed position and route the dual tether over the headrest. LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement for proper installation. Head Restraint Removal and Reinstallation The rear outboard head restraints can be removed if they interfere with the proper installation of the child restraint. The headrest in the rear center seating position is not removable and should be lowered to the stowed position for child restraint installation. If you are using a single tether in the rear outboard seating position and the head restraint has been removed, route the single tether over the seatback. If you are using a single tether in the rear center seating position, lower the adjustable headrest down to its stowed position and route the single tether over the headrest. 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the To remove the head restraint: 1. Partially fold the seatback forward. See Rear Seats on page 3-10 for additional information.