1994 Chevrolet Camaro Owner's Manual - Page 65

0 0 0 0 0 2 (Second Gear) - Press the clutch pedal as you let up on the accelerator pedal and shift into "2." Then, slowly let up on the clutch pedal as you press the accelerator pedal. 3,4 and 5 (Third, Fourth and Fifth Gears) - Shift into "3," "4" and "5" the same way you do for "2." Slowly let up on the clutch pedal as you press the accelerator pedal. To Stop - Let up on the accelerator pedal and press the brake pedal. Just before the vehicle stops, press the clutch pedal and the brake pedal, and shift to "Neutral." Neutral - Use this position when you start or idle your engine. R (Reverse) -To back up, press down the clutch pedal and shift into "R." Let up on the clutch pedal slowly while pressing the accelerator pedal. NOTICE: Shift to "R" (Reverse) only after your vehicle is stopped. Shifting to "R" (Reverse) while your vehicle is moving could damage your transmission. 1 3 5 R Also, use Reverse, along with the parking brake, for parking your vehicle. 2 4 6 Six-Speed This is your shift pattern. Here's how to operate your transmission: 0 1 (First Gear) - Press the clutch pedal and shift into "1." Then, slowly let up on the clutch pedal as you press the accelerator pedal. You can shift into "1" when you're going less than 20 mph (30 km/h). If you've come to a complete stop and it's hard to shift into "1 ," put the shift lever in "Neutral" and let up on the clutch. Press the clutch pedal back down. Then shift into 1 ." " 63 ...