1994 Chevrolet Camaro Owner's Manual - Page 80

Features and Controls Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase your speed. When you take your foot off the pedal, your vehicle will slow down to the Cruise Control speed you set earlier. Using Cruise Control on Hills How well your Cruise Control will work on hills depends upon your speed, load, and the steepness of the hills. When going up steep hills, you may have to step on the accelerator pedal to maintain your speed. When going downhill, you may have to brake or shift to a lower gear to keep your speeddown. Of course, applying the brake takes you out of Cruise Control. Many drivers find this to be too much trouble and don't use Cruise Control on steep hills. I lere's the second way to go to a higher peed: Move the Cruise switch from "ON" to "R/A." Hold it there until you get up to the speed you want, and then release the switch. To increase your speed in very small amounts, move the switch to "WA" for less than half a second and then release it. Each time you do this, your vehicle will go about 1 mph (1.6 km/h) faster. To Reduce Speed While Using Cruise Control There are two ways to reduce your speed while using cruise control: 1. Push in the button at the end of the lever until you reach the lower speed you want, then release it. 2. To slow down in very small amounts, push the button for less than half a second. Each time you do this, you'll go 1 mph (1.6 km/h) slower. ..78