1996 Chevrolet S10 Pickup Owner's Manual - Page 218
1996 Chevrolet S10 Pickup Manual
Page 218 highlights
6. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. 1 Never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheelcould fall off, causing a serious accident. I 7. Place the spare on the wheel mounting surface. A CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from places the where thewheel attaches to the vehicle. In an emergency, you can use a cloth or a paper towel use a to do this; but be sure to scraper or wire brush later,if you need to, to get allthe rust or dirt off. 8. Put the nuts on by hand. Make sure the cone-shaped end is toward the wheel. Tighten each nut by ' hand until the wheel is held against the hub. If a nut can'tbe turned by hand, use the wheel wrench and see your dealer as soon as possible. 5-28