1996 Chevrolet S10 Pickup Owner's Manual - Page 246
1996 Chevrolet S10 Pickup Manual
Page 246 highlights
Check the fluid level only when yourengine is off, the vehicle is parked on a level place and the transmission is cool enough for you to rest your fingers on the transmission case. Then, follow these steps: 3. If the fluid level is good, install the plug and besure it isfully seated. If the fluid level is low,add more fluid as described in the next steps. How to Add Fluid Here's how to add fluid. Refer to the Maintenance Schedule to determine what kind of fluid to use. See "Recommended Fluids and Lubricants" in theIndex. 1. Remove the filler plug. 2. Add fluid at the filler plug.hole. Add only enough fluid to bring the fluid level up to the bottom of the filler plug hole. 3. Install the filler plug. Be sure the plug is fully seated. Hydraulic Clutch The hydraulic clutch system in your vehicle is self-adjusting. A slight amount of play (1/4 inch to 1/2 inch or 6 mm to 12 mm) in the pedal is normal. 1. Remove the filler plug. 2. Check that the lubricant level isup to the bottom of the filler plug hole. It isn't agood idea to "top off' your clutch fluid. Adding fluid won't correct a leak. A fluid loss in this system could indicate a problem. Have the system inspected and repaired. 6-20