1996 Chevrolet S10 Pickup Owner's Manual - Page 282

Care of Safety Belts Keep beltsclean and dry. Cleaning the Outsideof the Windshield and Wiper Blades If the windshield is not clear after using the windshield washer, or if the wiper bladechatters when running, wax or other material may be onthe blade or windshield. Clean theoutside of the windshield with GM Windshield Cleaner, Bon-AmiPowder@(GM Part No. 1050011). The windshield is cleanif beads do not form when you rinseit with water. Clean the blade by wiping vigorously with a cloth soaked in full-strength windshield washer solvent. Then rinse the blade with water. Wiper blades shouldbe checked on a regular basis and replaced when worn. I A CAUTION: Do not bleachor dye safety belts.If you do, it may In severely weaken them. a crash they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. Glass Glass should becleaned often. GM Glass Cleaner (GM Part No. 1050427)or a liquid household glass cleaner will remove normal tobacco smoke and dust films. Don't use abrasivecleaners on glass, because they may cause scratches. Avoid placing decals on the inside rear window, since they mayhave to be scraped off later. Weatherstrips Silicone grease on weatherstrips will make them last longer, seal better, and stick or squeak. Apply not silicone grease with a clean cloth at least every six months. During verycold, damp weather more frequent application may be required. (See "Recommended Fluids and Lubricants" in Index.) the