1996 Chevrolet S10 Pickup Owner's Manual - Page 75
1996 Chevrolet S10 Pickup Manual
Page 75 highlights
transmission. The preferred method for shiftinginto 4LO is to have your vehicle moving 1 to 2 mph (1.6 to 3.2 kmh). Press and release the4LO switch. You must wait for the 4LO indicator light to stop flashing and remain illuminated before shifting your transmission into gearor releasing the clutch pedal. Shifting from4LO to 4HI To shift from 4LO to 4H1, yoIur vehicle must be stopped or moving less than 3 mph (4.8 kmh) with (N).or the clutch pedal the transmission in NEUTRAL engaged. The preferred method for shifting out of 4LO is to have your vehicle moving 1 to 2 mph (1.6 to 3.2 km/h). Press andrelease the 4HI switch. You must wait for the 4HI indicator light to stop flashing and remain illuminated before shifting your transmission into gearor releasing the clutch pedal. If the 4HI switch is pressed when your vehicle is in gear and/or moving, the 4HI indicator light will flash for 30 seconds but notcomplete the shift unless the vehicle is moving slower than 3 mph (4.8 k m h ) and the transmission is in NEUTRAL (N) or the clutch pedal engaged. On automatic transmission equipped vehicles, your if transfer case does not shift into 4H1, your transmission indicator switch may require adjustment. With your transmission in NEUTRAL(N), press and release the 4HI switch. While the 4HI indicator light isflashing, shift your transmission into PARK (P). Wait until the 4HI indicator light stayson before shifting your transmission into gear. This will get you into 4H1, but you should take your vehiclein for service to restore normal operation. If the 4LO switch is pressed when your vehicle is in gear and/or moving, the4LO indicator light will flash for 30 seconds and notcomplete the shift unless your vehicle is movingslower than 3 mph (4.8 km/h) andthe transmission is inNEUTRAL (N) or the clutch pedal is engaged. On automatic transmissionequipped vehicles, if your transfer case does not shift into 4L0, your transmission indicator switch mayrequire adjustment. With your transmission in NEUTRAL (N), press and release the 4LO switch. While the 4LO indicator light is flashing, shift your transmission into PARK (P). Wait until the 4LO indicator light stays on before shifting your transmission into gear. This will get you into 4L0, but you should take your vehiclein for service to restore normal operation. 2-24