1998 Chevrolet Tracker Owner's Manual - Page 95

Increasing Speed While Using Cruise Control There are two ways togo to a higher speed. Use the accelerator pedal togo to a higher speed. Turn the lever to COAST/SET and release. Take your foot off the accelerator pedal. You'll now cruise at the higher speed. Turn the lever to RESUME/ACCEL. Hold the lever at RESUME/ACCEL until you get up to the speed you want, then release the lever. Using Cruise Controlon Hills How well your cruise control will work hills depends on upon your speed, load and steepness of the hills. the When going up steep hills, you may have to step on the accelerator pedalto maintain your speed. When going downhill, you may have to brake or shift to a lower gear to keep your speed down. course, applying the brake Of takes you outof cruise control. Many drivers find this to be too much trouble and don't use cruise control on steep hills. Reducing Speed While Using Cruise Control To reduce your speed, turn and hold the lever in the COASTISET position until you reach the lower speed you want, then release the lever. Getting Outof Cruise Control There are three ways to turn cruise control: off Step lightly on the brake pedal, or push the clutch pedal if you have a manual transmission. Passing Another Vehicle While Using Cruise Control Push in the CANCEL button onthe end of the cruise control lever. Use the accelerator pedalto increase your speed. When you take your foot off the pedal, your vehicle will slow Press the CRUISE CTlU switch on the down to the cruise control speed you set earlier. instrument panel. Erasing Speed Memory When you turnoff the cruise control the ignition, or is erased. your cruise control set speed memory 2-36