2000 Chevrolet Tracker Owner's Manual - Page 90
2000 Chevrolet Tracker Manual
Page 90 highlights
To signal alane change, just raise or lower the lever until the arrowstarts to flash. Holdit there until you complete yourlane change. The lever will return by itself when you release it. Headlamp High/Low Beam Changer First, you must have headlamps on.For high beams, the push the turn signal lever toward the instrument panel. When the high beams are on, a light onthe instrument panel also willbe on. It will go off when you switch to low beam. As you signal a turn a lane change, if the arrows or don't flash but just stay on, a signal bulb may burned be out and other drivers won't see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't on at all when you go signal aturn, check the fuse (see "Fuses and Circuit Breakers" in the Index) andfor burned-out bulbs. Lamps On Reminder If you turn the ignition off, remove the key, open the door and leave lamps on, a tone will remind you the to turn off your lamps. To switch back to low beams, pull the lever toward you Flash-to-Pass With the lever in low-beam position, pull the lever the toward you to momentarily switch to high beam (to signal that you are going to pass). When you release th lever, the headlamps will return to low-beam operation. 2-31