2001 Chevrolet Malibu Owner's Manual - Page 274

7. Reverse the steps to reassemble the backplate and attach the taillamp assembly to the vehicle. Make sure that all four tabs of the backplate are securely fastened to the taillamp assembly before installing it on the vehicle. 8. When securing the lamp assembly back into place, align the assembly so that the trunk lid doesn't contact it. Dome Lamp 1. Grasp the center front and center rear portion of the housing and squeeze it firmly but gently. The housing should come off. 5. Carefully remove the backplate by gently pulling up on the two upper and two lower tabs. 6. Gently wiggle the bulb to remove it from the socket. Replace the bulb. If this doesn't work, you may need to use a small flathead screwdriver under the side of the housing to help pry it off. 2. Replace the old bulb with a new bulb. 3. Snap the housing back into place. 6-35