2001 Chevrolet S10 Pickup Owner's Manual - Page 115

Increasing Speed While Using Cruise Control There are two ways to go to a higher speed: Using Cruise Control on Hills How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. When going up steep hills, you may want to step on the accelerator pedal to maintain your speed. When going downhill, you may have to brake or shift to a lower gear to keep your speed down. Of course, applying the brake takes you out of cruise control. Many drivers find this to be too much trouble and don't use cruise control on steep hills. Ending Cruise Control There are two ways to turn off the cruise control: D Use the accelerator pedal to get to the higher speed. Press the button at the end of the lever, then release the button and the accelerator pedal. You'll now cruise at the higher speed. D Move the cruise switch from ON to R/A. Hold it there until you get up to the speed you want, and then release the switch. To increase your speed in very small amounts, briefly move the switch to R/A. Each time you do this, your vehicle will go about 1 mph (1.6 km/h) faster. Reducing Speed While Using Cruise Control D Step lightly on the brake pedal or push the clutch pedal, if you have a manual transmission. D Press in the button at the end of the lever until you reach the lower speed you want, then release it. button briefly. Each time you do this, you'll go 1 mph (1.6 km/h) slower. D Move the cruise switch to OFF. Erasing Speed Memory When you turn off the cruise control or the ignition, your cruise control set speed memory is erased. D To slow down in very small amounts, press the Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase your speed. When you take your foot off the pedal, your vehicle will slow down to the cruise control speed you set earlier. 2-44