2003 Chevrolet Blazer Owner's Manual - Page 338

,/ / Follow this diagram to store the underbody-mounted spare. 4. Raise the tire fully against the underside of the vehicle by turning the wrench clockwise until you hear two clicks or feel it skip twice. The spare tire hoist cannot be overtightened. B' A. Retainer B. ValveStem (Pointed Down) C. Spare or Flat Tire D. Spring E. F. G. H. WheelWrench Lower Raise Hoist Arm PUSH & PULL 1. Put the tire on the ground at the rear of the vehicle, with the valve stem pointed down and to the rear. 2. Pull the retainer through the wheel. 3. Put the chisel end of the wheel wrench, on an angle, through the hole in the rear bumper and into the hoist shaft. 5. Make sure the tire is stored securely. Push, pull, and then try to rotate or turn the tire. If the tire moves, use the wheel wrench to tighten the cable. 5-75