2003 Chevrolet Blazer Owner's Manual - Page 344

Wood Panels Usea Clean cloth moistened in Warm, soapy water (use mild dish washing soap). Dry the wood immediately with a clean cloth. Care of Safety Belts Keep belts clean and dm Glass Surfaces Glass should be cleaned often. GM Glass Cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass. See GM Vehicle Care/AppearanceMaterials on page 5-85. Notices Don't use abrasive cleaners on glass, because they may cause scratches. Avoid placing decals on the insiderear window, since they may have to be scraped off later. If abrasive cleaners are used the on inside rear of the window, an electric defogger element may be damaged. Any temporary license should not be attached across the defogger grid. Do not bleach OL -ye -.-. y belts. If you dc, .t may severely weakenthem. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. Weatherstrips Silicone grease O weatherstrips Will make them last n longer, seal better, and not stick or squeak. Apply silicone grease with a clean cloth at least every six months. During very cold, damp weather more frequent application may be required. See Part D: Recommended Fluids and Lubricants on page 6-33. 5-81