2003 Chevrolet Impala Owner's Manual - Page 274

Using the Radio 1. Turn the ignition to ACC or ON, with the radio off. Using the Accelerator Pedal 1. Turn the ignition to ON, with the engine off. 2. Press and hold the TUNE DlSP button on the radio for at least five seconds until SETTINGS is displayed. 3. Press the SEEK PSCAN up or down arrow to scroll through the main menu. 2. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset. However, if it stays on, it did not reset. You'll need to repeat the reset procedure. 4. Scroll until OIL LIFE appears on the display. 5. Press the 1 PREV or 2 NEXT buttons to enter the submenu. RESET will be displayed. What to Do with Used Oil Used engine oil contains certain elements that may be unhealthy for your skin and could even cause cancer. Don't let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner. Wash or properly dispose of clothing or rags containing used engine oil. See the manufacturer's warnings about the use and disposal of oil products. Used oil can be a threat to the environment. If you change your own oil, be sure to drain all the oil from the filter before disposal. Never dispose of oil by putting it in the trash, pouring it on the ground, into sewers, or into sirearns or bodies o i waier. insieaa, recycie ii by taking it to a place that collects used oil. If you have a problem properly disposing of your used oil, ask your dealer, a service station or a local recycling center for help. 6. Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. 7. Once the indicator has been reset, scroll until EXIT appears on the display. 8. Press the TUNE DlSP button to exit programming. A chime will be heard to verify the exit. 5-2 1