2003 Chevrolet Impala Owner's Manual - Page 293

7.1. Remove the oil fill tube, with cap attached, from the valve cover. 7.2. Insert the catch tab on the cover shield under the bracket on the engine. 7.3. Place the hole in the cover shield over the hole in the valve cover. Install oil fill tube and cap by twisting clockwise. 5. Fill the radiator with the proper DEX-COOL@ coolant mixture, up to the base of the filler neck. See Engine Coolant on page 5-26 for more information about the proper coolant mixture. If you see a stream of coolant coming from an air bleed valve, close the valve. Otherwise, close the valves after the radiator is filled. 6. Rinse or wipe any spilled coolant from the engine and the compartment. 7. If you have the 3800 V6 engine, replace the 3800 Series II V6 engine cover shield. 8. Then fill the coolant recovery tank to the COLD mark. 9. Put the cap back on the coolant recovery tank, but leave the radiator pressure cap off. 5-40