2003 Chevrolet Silverado 1500 Pickup Owner's Manual - Page 464
2003 Chevrolet Silverado 1500 Pickup Manual
Page 464 highlights
If the spare is hanging from the cable, insert the hoist handle, extension and wheel wrench into the hoist shaft hole in the bumper, and turn the wheel wrench counterclockwise to lower the spare the rest of the way. 13. Tilt the retainer at the end of the cable and pull it through the wheel opening. Pull the tire out from under the vehicle. 14. If the cable is hanging under the vehicle, turn the wheel wrench in the hoist shaft hole in the bumper clockwise to raise the cable back up. Have the hoist assembly inspected as soon as you can. You will not be able to store a spare or flat tire using the hoist assembly until it has been replaced. 9. Turn the wrench clockwise to raise the jack until it lifts the end fitting. IO. Continue raising the jack until the spare tire stops moving upward and is held firmly in place. The secondary latch has released and the spare tire is balancing on the jack. 11. Lower the jack by turning the wheel wrench counterclockwise. Keep lowering the jack until the spare tire slides off the jack or is hanging by the cable. 12. Disconnect the jack handle from the jack and carefully remove the jack. Use one hand push to against the spare while firmly pulling the jack out from underthe spare tire with the other hand. 5-89