2004 Chevrolet Cavalier Owner's Manual - Page 108

Windshield Wipers Q DELAY: If your vehicle has delay wipers, move the lever to DELAY to choose a delayed wiping cycle. Turn the lever down for a longer delay or up for a shorter delay. The further the lever is turned upward, the shorter the delay will be and the further the lever is turned downward, the longer the delay will be. The wiper speed can only be adjusted when the lever is in the DELAY position. Use this position for light rain or snow. Q 1 (Low Speed): Move the lever up to the first setting past DELAY for steady wiping at low speed. Q 2 (High Speed): Move the lever up to the second setting past DELAY for steady wiping at high speed. R MIST: Move the lever all the way down to MIST for a single wiping cycle. Hold it there until the windshield wiper starts; then let go. The windshield wipers will stop after one wipe. If you want more wipes, hold the band on mist longer. Heavy snow or ice can overload the wipers. If this occurs, a circuit breaker will stop the wipers until the wiper motor cools. So, be sure to clear any snow or ice from the windshield wiper blades before using them. If the wiper blades are frozen to the windshield, carefully loosen them or warm the windshield before turning the wipers on. If your blades do become worn or damaged, get new blades or blade inserts. Use the lever located on the right side of the steering wheel to operate the windshield wipers. 9 OFF: Move the lever to OFF to turn off the windshield wipers. 3-10