2004 Chevrolet Malibu Owner's Manual - Page 128

To set a speed do the following: 1. Press the On/Off button to turn cruise control on. The indicator light on the button will come on. 2. Get to the speed you want. 3. Press the −SET part of the control button and release it. The cruise symbol will display in the instrument panel cluster to show the system is engaged. 4. Take your foot off the accelerator pedal. Increasing Speed While Using Cruise Control There are two ways to go to a higher speed. • Disengage the cruise control but do not turn it off. • If the cruise control system is already engaged, press the +RES button. Hold it there until you get up to the speed you want, and then release the button. To increase your speed in very small amounts, press the +RES button briefly and then release it. Each time you do this, your vehicle will go about 1 mph (1.6 km/h) faster. Resuming a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake. This, of course, disengages the cruise control. The cruise symbol in the instrument panel cluster will also go out indicating cruise is no longer engaged. To return to your previously set speed, you do not need to go through the set process again. Once you're going about 25 mph (40 km/h) or more, you can press the +RES button briefly. This will take you back up to your previously chosen speed and stay there. Reducing Speed While Using Cruise Control If the cruise control system is already engaged, • Push and hold the −SET button until you reach the lower speed you want, then release it. • To slow down in very small amounts, push the −SET button briefly. Each time you do this, you'll go about 1 mph (1.6 km/h) slower. 3-12