2007 Chevrolet Cobalt Owner's Manual - Page 143

Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. To use it, pull the turn signal/multifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off. & (Intermittent; Speed Sensitive Wipers): Move the lever to this position for intermittent or speed sensitive operation. When you select this position, the delay will vary depending on the vehicles speed, as well as, the manually selected delay. x (Delay): When the lever is in the intermittent position, turn the intermittent adjust band with this symbol on it up or down to set for a shorter or longer delay between wipes. To the left of the adjust band are bars, increasing in size from bottom to top, that indicate the frequency of the wipes. Smaller bars mean the wipers movement is less frequent. Larger bars mean the movement is more frequent. Windshield Wipers 6 (Low Speed): Move the lever up to the first setting past intermittent, for steady wiping at low speed. 1 (High Speed): Move the lever up to the Use this lever, located on the right side of the steering wheel, to operate the windshield wipers. second setting past intermittent, for wiping at high speed. 9 (Off): Move the lever to this position to turn off the windshield wipers. 8 (Mist): Move the lever all the way down to this position for a single wiping cycle. Hold it there until the windshield wipers start; then let go. 143