2010 Chevrolet Impala Owner's Manual - Page 298

2010 Chevrolet Impala Manual

Page 298 highlights

How to Add Coolant to the Radiator If coolant is needed, add the proper mixture directly to the radiator, but be sure the cooling system is cool before this is done. 1. You can remove the pressure cap when the cooling system, including the pressure cap and upper radiator hose is no longer hot. Turn the pressure cap slowly counterclockwise. { WARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan. { WARNING: Steam and scalding liquids from a hot cooling system can blow out and burn you badly. They are under pressure, and if you turn the surge tank pressure cap - even a little - they can come out at high speed. Never turn the cap when the cooling system, including the surge tank pressure cap, is hot. Wait for the cooling system and surge tank pressure cap to cool if you ever have to turn the pressure cap. If you hear a hiss, wait for that to stop. A hiss means that there is still some pressure left. 2. Keep turning the pressure cap and remove it. 3. Fill the cooling system with the proper DEX-COOL® coolant mixture, up to the base of the filler neck. See Engine Coolant on page 6-25 Engine Coolant for more information about the proper coolant mixture. Rinse or wipe any spilled coolant from the engine and the compartment. 6-28

Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

2010 Chevrolet Impala Manual