2011 Chevrolet Traverse Owner's Manual - Page 178

5-48 Instruments and Controls If you do not exit, pressing the customization button again will return you to the beginning of the feature settings menu. Press the customization button until FACTORY SETTINGS appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: RESTORE ALL (default): The customization features will be set to their factory default settings. DO NOT RESTORE: The customization features will not be set to their factory default settings. To select a setting, press the set/ reset button while the desired setting is displayed on the DIC. EXIT FEATURE SETTINGS This feature allows you to exit the feature settings menu. Press the customization button until FEATURE SETTINGS PRESS V TO EXIT appears in the DIC display. Press the set/reset button once to exit the menu. Universal Remote System See Radio Frequency Statement on page 13‑18 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-210/220/310. Exiting the Feature Settings Menu The feature settings menu will be exited when any of the following occurs: . The vehicle is shifted out of P (Park). The vehicle is no longer in ON/RUN. The trip/fuel or vehicle information DIC buttons are pressed. The end of the feature settings menu is reached and exited. A 40 second time period has elapsed with no selection made. Universal Remote System Programming . . . . This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices.