2011 Chevrolet Traverse Owner's Manual - Page 239
2011 Chevrolet Traverse Manual
Page 239 highlights
Infotainment System Press to end a call, reject a call, or cancel an operation. 7-49 c x (Phone On Hook): Pairing . Pairing only needs to be completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To connect to a different paired phone, see "Connecting to a Different Phone" later in this section. 4. Start the pairing process on the cell phone that you want to pair. For help with this process, see the cell phone manufacturer's user guide. 5. Locate the device named "Your Vehicle" in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN that was provided in Step 3. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. See "Listing All Paired and Connected Phones" later in this section for more information. 6. Repeat Steps 1 through 5 to pair additional phones. A Bluetooth cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See the cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands‐Free Calling, if equipped. Refer to the OnStar Owner's Guide for more information. Pairing Information . . . Up to five cell phones can be paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving. Pairing a Phone 1. Press and hold two seconds. . b g for 2. Say "Bluetooth." 3. Say "Pair." The system responds with instructions and a four‐digit Personal Identification Number (PIN). The PIN is used in Step 5.