2011 Chevrolet Traverse Owner's Manual - Page 242
2011 Chevrolet Traverse Manual
Page 242 highlights
7-52 Infotainment System If an unwanted number is recognized by the system, say "Clear" at any time to clear the last number. To hear all of the numbers recognized by the system, say "Verify" at any time. 1. Press and hold two seconds. 2. Say "Digit Dial." 3. Say each digit, one at a time, that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say "Dial." Once connected, the person called will be heard through the audio speakers. Using the "Re‐dial" Command 1. Press and hold two seconds. Digit Dial: This command allows a phone number to be dialed by entering the digits one at a time. Re‐dial: This command is used to dial the last number used on the cell phone. Using the "Dial" or "Call" Command 1. Press and hold two seconds. b g for 2. After the tone, say "Re‐dial." Once connected, the person called will be heard through the audio speakers. b g for b g for Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle... 2. Say "Dial" or "Call." 3. Say the entire number without pausing, or say the name tag. Once connected, the person called will be heard through the audio speakers. Using the "Digit Dial" Command The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. b g to answer the call. Press c x to ignore a call. Press Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press b g to answer an incoming call when another call is active. The original call is placed on hold.