2011 Chevrolet Traverse Owner's Manual - Page 379

Vehicle Care Removal and Installation of the Sealant Canister To remove the sealant canister: 1. Unwrap the sealant hose. 2. Press the canister release button. 3. Pull up and remove the canister. 4. Replace with a new canister which is available from your dealer. The tire sealant and compressor kit has an accessory adapter located in a compartment on the bottom of its housing that may be used to inflate air mattresses, balls, etc. 5. Push the new canister into place. 10-67 1. Press down on the latch tab and pull the cover off to access the storage compartment. 2. Press the two tabs on the quick release buckle to release the tire sealant and compressor kit strap. 3. Remove the sealant and compressor kit from its tray. To store the tire sealant and compressor kit, reverse the steps. Storing the Tire Sealant and Compressor Kit The tire sealant and compressor kit is located in the storage compartment on the driver side, at the rear of the vehicle.