2005 Chrysler Crossfire Owner's Manual - Page 113

UNDERSTANDING YOUR INSTRUMENT PANEL 113 The volume is controlled by rotating the ON/OFF knob to the left or right. Audio (AUD) Settings • Bass (BASS) Press the AUD button repeatedly until BASS appears. Rotate the right rotary control for the desired level (from -9 to +9). • Treble (TREB) Press the AUD button repeatedly until TREB appears. Rotate the right rotary control for the desired level (from -9 to +9). • Balance (BAL) Press the AUD button repeatedly until BAL appears. Rotate the right rotary control for the desired level (from -9 to +9). • Linear adjustment (LINEAR) The tone values for the set signal source (e.g., radio/ FM) are set to "0" (mean value). Press and hold the AUD button for more than 4 seconds until FM LINEAR appears (which affects FM only). Press and hold the AUD button for more than eight seconds until ALL LINEAR appears (which affects both radio and CD). • Mute function (MUTE) To activate the mute function in all modes and wavebands, press the TP button. The mute function is cancelled by either pressing the TP button again, or by turning the volume control. NOTE: After six seconds without any action, or by pressing OPT, CD, AM, FM, or TP, the current setting is cancelled, and the new setting is stored. FM1 - FM2 - FM AS - BEST FM The system has four FM memory modes that can be selected by repeatedly pressing the FM button. FM1 - One of ten memorized FM station frequencies can be selected by pressing a multifunction button. FM2 - A second set of ten memorized FM station frequencies can be selected by pressing a multifunction button. 4