2006 Chrysler Pacifica Owner's Manual - Page 121
2006 Chrysler Pacifica Manual
Page 121 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Repeat the above steps for the second position using the other driver's door numbered button and Remote Keyless Entry Transmitter. Each time the SET (S) button and a numbered button are pressed, you erase the old memory and store a new one. To Disable A Transmitter Link, Follow These Steps: 1. Select "Remote Linked To Memory" from the Electronic Vehicle Information Center, Customer Programmable features. 2. Turn the ignition switch to the OFF position and remove the key. 3. Press and release the SET (S) button located on the driver's door. A light in the button will flash telling you that you are in the set memory mode. You have five seconds to complete the next step. 4. Within 5 seconds, press and release button 1 or 2 on the driver's door. A chime will sound signaling you that the driver memory has been set. A message will also be displayed in the Electronic Vehicle Information Center (EVIC), indicating a position has been set. 5. Within 5 seconds, press and release the UNLOCK button on the remote keyless entry transmitters. A chime will sound signaling you that the transmitter link has been successfully disabled. A message will also be displayed in the Electronic Vehicle Information Center (EVIC), indicating the transmitter has been disabled. To disable another transmitter from memory positions 1 or 2, repeat steps 1- 4 for each transmitter. NOTE: This function can be selected using the "Customer Programmable Features" in the Electronic Vehicle Information Center (EVIC) section, Otherwise see your authorized dealer. 3