2006 Chrysler Sebring Owner's Manual - Page 204

204 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove lug nuts and tire. 7. Mount spare tire. 8. Tighten all lug nuts on mounting studs. 9. Lower the vehicle to the ground by turning the jack handle counterclockwise. 10. Fully tighten the lug nuts. Torque wheel lug nuts to 100 ft. lbs. (135 N·m). 11. Store the flat tire, jack and tools. WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. 12. Wheel cover installation (if required). Do not attempt to install a wheel cover on a compact spare. Align valve notch in wheel cover with valve stem on wheel. Snap cover into place. NOTE: When reinstalling the center cap it is necessary to align the center cap notch with the first spoke, just right of the valve stem. 13. Adjust the tire pressure as soon as possible. Correct pressure is on the label located on the driver's door.